Lo-bit record Plate core 12AU7 VCA core 26xModeled Gated Reverb Plugin Combining Analog Plate Reverb & VCA Dynamics. 『Plate core 12AU7 VCA core 26x』 Released. Product Overview. 『Plate core 12AU7 VCA core 26x』 is a gated reverb processor that combines a high-density plate core modeled after the reverberation structure of the legendary EMT 140 analog plate reverb with 12AU7 tube saturation and VCA Core dynamics (Gate / Compressor). From classic snare gated reverb processing to tight reverb decay control, its intuitive interface allows you to effortlessly craft rich, high-quality audio textures. Key Features. 1. 【High-Density Plate Core Based on EMT 140 Modeling】. Faithfully recreates the dense, smooth plate reverberation characteristic of the industry-standard EMT 140 plate reverb. 2. 【VCA Core Dynamic Gate & Compressor】. Equipped with a VCA-spec dynamics circuit acting directly on the wet reverb tail. ・Features a fast-responding gate with switchable Hard/Soft modes, providing a versatile decay range from tight cutoffs to natural fade-outs. ・Combining it with the VCA compressor evens out the reverb sustain right up to the gate closure, delivering a distinct, punchy gated effect. 3. 【12AU7 Pure 2nd Harmonic Drive (200% Scale)】. Modeled after 12AU7 tube circuitry, it adds pure 2nd-order (even) harmonics without any harsh odd-order harmonics. By targeting key frequency zones (120 Hz / 250 Hz / 2 kHz), it adds warmth and body without causing drastic volume spikes. 4. 【Multi-Impulse Equal-Power M/S Width Engine】. Utilizes a multi-impulse diffuser matrix alongside an M/S synthesis circuit. Even when expanding the Width up to 200%, it maintains the solid phantom center core (Mid component) while adding natural stereo width to the sides. 5. 【Post-Reverb 16kHz Air EQ】. Features a 16,000 Hz (16 kHz) ultra-high shelf EQ placed at the output stage of the wet signal path. It adds silky high-end air exclusively to the reverb tail while keeping the original dry signal untouched. Controls. 【Tube Saturation & EQ】. ・Valve Drive [0.0 ~ 36.0 dB] : Adjusts the amount of 2nd-order even harmonics generated by the 12AU7 tube modeling, adding warmth and body. ・Valve On/Off : Enables or bypasses the tube saturation circuit. ・HPF [20 ~ 500 Hz] : Adjusts the low-cut frequency for the reverb send signal, preventing low-end muddiness. ・Air EQ [Off / 3dB / 6dB] : Boosts frequencies above 16 kHz on the wet reverb tail to add natural airy brilliance. 【Reverb】. ・Decay Time [0.5 ~ 10.0 s] : Sets the decay time (RT60) of the plate reverb. ・Damp [1,000 ~ 20,000 Hz] : Adjusts the high-frequency damping cutoff of the reverb tail. ・Width [0 ~ 200 %] : Adjusts stereo width. Retains the center core image even at maximum 200% width. 【VCA Dynamics (Gate & Compressor)】. ・Gate On/Off : Enables or bypasses the gate circuit. Turning it OFF allows the plugin to function as a standalone plate reverb. ・Comp On/Off : Enables or bypasses the VCA compressor dedicated to the wet reverb tail. ・Gate Hard/Soft : Switches between "Hard" mode for sharp, instant cutoffs and "Soft" mode for smooth, natural decay. ・Sidechain Source [Int / Ext] : Toggles the gate/comp detection signal source between internal wet reverb (Int) and external sidechain input track (Ext). ・Gate Threshold [-60.0 ~ 0.0 dB] : Sets the threshold level for gate opening and closing. ・Gate Hold/Release [10 ~ 500 ms] : Adjusts the gate release speed. Shorter values create a tight, punchy gated reverb. ・Comp Threshold [-40.0 ~ 0.0 dB] / Comp Ratio [1.0:1 ~ 20.0:1] : Sets the operating threshold and compression ratio for the VCA compressor. 【Master Output】. ・Gain [-24.0 ~ +12.0 dB] : Adjusts the master output level. ・Dry/Wet [0 ~ 100 %] : Controls the balance between the dry original signal and the wet processed signal (reverb + gate/comp). Read More