All You Need for Artificial Intelligence is a Commodore 64Artificial intelligence has always been around us, with [Timothy J. O’Malley]’s 1985 book on AI projects for the Commodore 64 being one example of this. With AI defined as being the theory and development of systems that can perform tasks that normally requiring human intelligence (e.g. visual perception, speech recognition, decision-making), this book is a good introduction to the many ways that computer systems for decades now have been able to learn, make decisions and in general become more human-like. Even if there’s no electronic personality behind the actions.
In the book’s first chapter, [Timothy] isn’t afraid to toss in some opinions about the true nature of intelligence and thinking. Starting with the concept that intelligence is based around storing information and being able to derive meaning from connections between stored pieces of information, the idea of a basic AI as one would use in a game for the computer opponent arises. A number of ways of implementing such an AI is explored in the first and subsequent chapters, using Towers of Hanoi, chess, Nim and other games.
After this we look at natural language processing – referencing ELIZA as an example – followed by heuristics, pattern recognition and AI for robotics. Although much of this may seem outdated in this modern age of LLMs and neural networks, it’s important to realize that much of what we consider ‘bleeding edge’ today has its roots in AI research performed in the 1950s and 1960s. As [Timothy] rightfully states in the final chapter, there is no real limit to how far you can push this type of AI as long as you have more hardware and storage to throw at the problem. This is where we now got datacenters full of GPU-equipped systems churning through vector space calculations for the sake of today’s LLM & diffusion model take on ‘AI’.
Using a Commodore 64 to demonstrate the (lack of) validity of claims is not a new one, with recently a group of researchers using one of these breadbin marvels to run an Ising model with a tensor network and outperforming IBM’s quantum processor. As they say, just because it’s new and shiny doesn’t necessarily mean that it is actually better.

From Lime to Uber to Hertz: Free and discounted Election Day ridesElection Day is nearly here, and if you haven’t already mailed in your ballot or gone in for early voting, you might need a ride come November 5.  Here’s a roundup of all the freebies, discounts, and information on getting to the polls that transportation companies are offering. Micromobility Lime is offering free rides to […]
© 2024 TechCrunch. All rights reserved. For personal use only.

Polygons On a LatheMost professionals would put a polygon on the end of a turned part using a milling machine. But many a hobbyist doesn’t have a mill. And if the polygon needs to be accurately centered, remounting the stock costs accuracy.
[Mehamozg] demonstrates you can turn a polygon on a lathe.
Polygons on shaft ends are surprisingly common, whether you are replacing a lost chuck key, need an angular index, or need a dismountable drive. As the video shows, you can definitely make them on the lathe.
But how the heck does this work? It seems like magic.
Lets start by imagining we disengage and lock the rotating cutter in [Mehamozg]’s setup and run the lathe. If the tool is pointed directly at the center we are just turning normally.  If we angle the tool either side of center we still get a cylinder, but the radius increases by the sin of the angle.
Now, if we take a piece of stock with a flat on it and plot radius versus angle we get a flat line with a sin curve dip in it. So if we use [Mehamozg]s setup and run the cutter and chuck at the same speed, the cutter angle and the stock angle increase at the same time, and we end up with a flat on the part.  If the cutter is rotating an even multiple of the chuck speed, we get a polygon.
The rub in all this is the cutter angle.. At first we were convinced it was varying enormously. But the surface at the contact point is not perpendicular to  the radius from center to contact. So it cancels out, we think.  But our brains are a bit fried by this one. Opinions in the comments welcomed.
We like this hack. It’s for a commonly needed operation, and versatile enough  to be worth fiddling with the inevitable pain of doing it the first time.  For a much more specialized machining hack, check out  this tool that works much the same in the other axis.

Independent and DIY Musician News Last WeekLast week, our tips and advice for independent and DIY musicians news last week covered how to book more gigs, promote internationally, and more...
The post Independent and DIY Musician News Last Week appeared first on Hypebot.

Music Business News Last Week: Growth, Controversies, LayoffsMusic business news last week was a busy week by any definition, the music industry was no exception, with strong Threads growth, the potential fall of TikTok, DistroKid and TIDAL. Continue reading
The post Music Business News Last Week: Growth, Controversies, Layoffs appeared first on Hypebot.

The Crow Hill Company launches FREE Vaults Orchestral FX Halloween Strings Plugin
On Friday, The Crow Hill Company launched its new free Vaults Orchestral FX strings virtual instrument. The new Halloween-themed plugin is a macOS and Windows release available in AU, VST3, VST, and AAX formats. In the introductory YouTube video for the release, The Crow Hill Company founder Christian Henson described the instrument as “30 string [...]
View post: The Crow Hill Company launches FREE Vaults Orchestral FX Halloween Strings Plugin

Release details
Release title:
Ain't no secret
Main artist name:
Plexine
Release date:
31st Oct, 2024
https://publme.lnk.to/Aintnosecret
#newmusic #Release #Music #indepedent #artist #experimental #hiphop

Stablecoin supply alone won't pump Bitcoin markets — Ki Young JuStablecoins are now primarily used to store value in countries with rapidly depreciating fiat currencies or prohibitive capital controls. 

Why Wiz really turned down Google’s $23B offerWelcome back to Week in Review. This week, we’re coming at you right off the heels of TechCrunch Disrupt! If you missed it, we’re highlighting conversations from Perplexity CEO Aravind Srinivas, WordPress co-founder Matt Mullenweg, and Disney star turned space CEO Bridgit Mendler. Of course, we’ve got news from the rest of the tech world […]
© 2024 TechCrunch. All rights reserved. For personal use only.

3D Printed Hardware Sorter Keeps It SimpleIf you’re like us, you’ve got at least one bin dedicated to keeping the random hardware you just can’t bear to part with. In our case it’s mostly populated with the nuts and bolts left over after finishing up a car repair, but however it gets filled, it’s a mess. The degree to which you can tolerate this mess will vary, but for [EmGi], even a moderately untidy pile of bolts was enough to spur this entirely 3D-printed mechanical bolt sorter.
The elements of this machine bear a strong resemblance to a lot of the sorting mechanisms we’ve seen used on automated manufacturing and assembly lines. The process starts with a hopper full of M3 cap head bolts of varying lengths, which are collated by a pair of elevating platforms. These line up the bolts and lift them onto a slotted feed ramp, which lets them dangle by their heads and pushes them into a fixture that moves them through a 90° arc and presents them to a long sorting ramp. The ramp has a series of increasingly longer slots; bolts roll right over the slots until they find the right slot, where they fall into a bin below. Nuts can also feed through the process and get sorted into their own bin.
What we like about [EmGi]’s design is its simplicity. There are no motors, bearings, springs, or other hardware — except for the hardware you’re sorting, of course. The entire machine is manually powered, so you can just grab a handful of hardware and start sorting. True, it can only sort M3 cap head bolts, but we suspect the design could be modified easily for other sizes and styles of fasteners. Check it out in action in the video below.
Just because it’s simple doesn’t mean we don’t like more complicated hardware sorters, like the ones [Christopher Helmke] builds.

Thanks to [john] for the tip.

Supercon 2024: Streaming LiveThe 2024 Hackaday Supercon is on in Pasadena, but if you couldn’t make it to sunny California this year, don’t worry. We’ve got a live streams of the main stage talks, and all of the second track talks are being recorded and will be put up on the YouTube channel after the con.

If you’re watching from home and want to join the conversation, today might be a good time to join the official Hackaday Discord server.

Kingfish to Launch Red Zero Records Imprint Via Exceleration MusicGrammy-winning guitarist, vocalist, and songwriter Christone “Kingfish” Ingram has teamed with Exceleration Music to launch a new label, Red Zero Records. The label’s inaugural release slated for 2025 will be the third studio album by Ingram and will follow up his 2023 chart-topping, critically-lauded Live in London, which was Grammy nominated for Best Contemporary Blues Album.

In addition to releasing his own recordings under the Red Zero banner, Ingram will serve as the label’s CEO. His longtime manager and label co-founder Ric Whitney will assume the role of president, and both will be directly involved in signing and developing artists on the label’s roster.

Under the terms of their partnership agreement, Exceleration Music and Redeye Distribution will exclusively provide label services and global distribution for Red Zero. This new imprint provides Ingram and Red Zero artists with the ability to tap into expertise that exists across the Exceleration labels and central teams, including Alligator Records, who released his first three albums, including the Grammy-winning 662.

“The name Red Zero Records is a nod to my early days in both Clarksdale, Mississippi and in music,” said Ingram. “As a kid, I played my first few live performance gigs in my hometown at Red’s Lounge and Ground Zero Blues Club. These places and the people there were instrumental in my development as a musician, so we wanted to pay homage in a unique way.”

Learn more at www.excelerationmusic.com.The post Kingfish to Launch Red Zero Records Imprint Via Exceleration Music first appeared on Music Connection Magazine.

Microsoft and A16Z set aside differences, join hands in plea against AI regulationTwo of the biggest forces in two deeply intertwined tech ecosystems — large incumbents and startups — have taken a break from counting their money to jointly plead that the government cease and desist from even pondering regulations that might affect their financial interests, or as they like to call it, innovation. “Our two companies […]
© 2024 TechCrunch. All rights reserved. For personal use only.

Judge pushes Tornado Cash co-founder trial to April 2025Roman Storm, currently free on bail and facing three federal charges, will have another four months to prepare for his criminal trial.

Ricky Martin Headlining AIDS Healthcare Foundation World AIDS Day ConcertGlobal superstar Ricky Martin will headline the annual World AIDS Day concert, presented by AIDS Healthcare Foundation (AHF), the world’s largest nonprofit HIV/AIDS service provider. The event takes place on Monday, December 2, 2024 at the Watsco Center at the University of Miami (UM) in Coral Gables, Florida.  Complimentary tickets are available by registering at AHFevents.org.

World AIDS Day is commemorated each year on December 1st and is an opportunity for communities to unite in the fight against HIV, show support for people living with HIV, and remember those we’ve lost. The evening’s event also will feature a performance by renowned DJ and rapper DJ Spinderella, and the AHF Lifetime Achievement award will be presented to Dr. Julio Frenk, UM’s outgoing president and chancellor-designate for UCLA.

Multi award-winning Puerto Rican singer/songwriter Ricky Martin, known globally as the “King of Latin Pop,” has used his platform to bring greater awareness and support for various issues around HIV/AIDS, human trafficking, and LGBTQIA+ rights. Dr. Julio Frenk played a pivotal role in launching AHF’s Global Public Health Institute at UM. His groundbreaking contributions to HIV/AIDS response include securing universal access to antiretroviral therapy in Mexico, advancing anti-stigma efforts, fostering global health collaborations, and strengthening public health policies worldwide.

AIDS Healthcare Foundation (AHF), the world’s largest HIV/AIDS healthcare organization, provides cutting-edge medicine and advocacy to more than 2.1 million individuals across 47 countries, including the U.S. and in Africa, Latin America/Caribbean, the Asia/Pacific Region, and Eastern Europe. To learn more about AHF, visit online at AIDShealth.org,The post Ricky Martin Headlining AIDS Healthcare Foundation World AIDS Day Concert first appeared on Music Connection Magazine.