Midi is building a digital platform for an oft-overlooked area of women’s healthWhen Joanna Strober was around 47, she stopped sleeping. While losing sleep is a common symptom of perimenopause, she first had to go to multiple providers, including driving 45 minutes out of San Francisco to pay $750 out of pocket, to get that diagnosis and proper treatment. “That feeling of wow, I’ve really been suffering […]
© 2024 TechCrunch. All rights reserved. For personal use only.

Arturia release Augmented Yangtze Arturia’s Augmented series offers a combination of sampled acoustic instruments and synthesis, providing music makers with a comprehensive range of sounds that range from authentic to abstract.

The Cheapest USB Blaster Ever, Thanks To CH552Here’s a CH552G-based USB Blaster project, in case you needed more CH552G in your life, which you absolutely do. It gives you the expected IDC-10 header ready for JTAG, AS, and PS modes. What’s cool, it fits into the plastic shell of a typical USB Blaster, too!
The PCB is flexible enough, and has all the features you’d expect – a fully-featured side-mounted IDC-10 header, two LEDs, a button for CH552 programming mode, and even a UART header inside the case. There’s an option to add level shifter buffers, too – but you don’t have to populate them if you don’t want to do that for whatever reason! The Hackaday.io page outlines all the features you are getting, though you might have to ask your browser to translate from Chinese.
Sadly, there’s no firmware or PCB sources – just schematics, .hex, BOM, and Gerber .zip, so you can’t fix firmware bugs, or add the missing USB-C pulldowns. Nevertheless, it’s a cool project and having the PCB for it is lovely, because you never know when you might want to poke at a FPGA on a short notice. Which is to say, it’s yet another CH552 PCB you ought to put in your PCB fab’s shopping cart! This is not the only CH552G-based programming dongle that we’ve covered – here’s a recent Arduino programmer that does debugWire, and here’s like a dozen more different CH552G boards, programmers and otherwise.

The MLC Seeking Suggestions for Board of Directors and Advisory Committee CandidatesPictured: MLC CEO Kris Ahrend

The Mechanical Licensing Collective (The MLC) is accepting suggestions of Publisher candidates for its Board of Directors and Unclaimed Royalties Oversight, Dispute Resolution and Operations Advisory committees. Under the Music Modernization Act (MMA), certain governance positions at The MLC are reserved for representatives of Publishers. The terms of several Publisher seats on the Board and the organization’s advisory committees are slated to end later this year.  

Elections to determine who will fill the open Board seats will be held this summer. Board and committee members sit for three-year terms and may be re-elected. Seats are filled pursuant to The MLC’s Bylaws.

There are openings on the Board of Directors for two (2) Publisher representatives. Under The MLC’s Bylaws, a “Publisher” means a music publisher to which songwriters have assigned exclusive rights of reproduction and distribution of musical works with respect to Covered Activities. “Covered Activities” means the making of digital phonorecord deliveries of musical works, including in the form of permanent downloads, limited downloads, or interactive streams, where such activity qualifies for a compulsory license under Section 115 of the U.S. Copyright Act.

The openings on The MLC’s advisory committees are as follows:

Two (2) Publisher seats on the Unclaimed Royalties Oversight Committee, which recommends policies and procedures to The MLC’s Board related to the distribution of unclaimed accrued royalties; 

Two (2) Publisher seats on the Dispute Resolution Committee, which recommends policies and procedures to the Board for the processing of royalties related to works that are subject to disputes over ownership; and 

Two (2) Publisher seats on the Operations Advisory Committee, which makes recommendations to the Board concerning the operations of The MLC, including the efficient investment in and deployment of information technology and data resources. 

The MLC’s Board of Directors and committees meet regularly, and all meetings allow for virtual participation such that travel is not generally required. Members are expected to devote sufficient time to prepare for and participate fully in all meetings. More information on The MLC’s Board of Directors and advisory committees can be found here.

Suggestions should be made no later than May 31, 2024. To suggest a candidate for a Publisher representative seat to The MLC’s Board or committees, please complete the suggestion form available here. 

Possibly The Cheapest Way To Film In Bullet TimeWhen The Matrix hit the cinemas back in 1999 it started a minor revolution with its use of so-called “Bullet time” — a freeze-frame technique in which the action could move round a momentarily frozen subject. It’s filmed using an array of cameras in an arc, something which was pretty expensive back then but is now within the reach of almost anyone. Just how cheaply bullet time can be filmed is shown by [3DSage], who turned nine toy cameras into a budget bullet time rig.
The cameras themselves are what you might expect for the princely sum of nine dollars, but as he points out, their low-resolution video has a certain charm. Some iteration was required to produce the rig without fouling their flip-out screens, and he found that the video quality was far better than their still image quality. But eventually he was able to extract the required array of frames and stitch them together with a video interpolator for the required effect. His cat is a handsome creature from any angle, we can now reveal.
The video below the break has all the details, and while we couldn’t spot quite the same camera he used on our local version of the online shop he used, there seem to be plenty of similar cheap devices should you wish to try it for yourself. Either way, this cost much less than the previous budget bullet time contender.

Warner Music Group boss Robert Kyncl backs US Senate bill to crack down on AI deepfakesKyncl to give testimony to a subcommittee of the Senate Judiciary Commitee on Tuesday (April 30)
Source

‘There are so many people who make beats but don’t know how to produce.’T-Minus talks about his work with J Cole, Drake, Lil Wayne and more, as well as what makes a great producer in 2024 and what he would change about the modern music industry
Source

Instagram updates algorithm to favor small creators, original contentMeta-owned Instagram is making changes in the coming weeks designed to give creators of all popularities more equal reach.....
The post Instagram updates algorithm to favor small creators, original content appeared first on Hypebot.

FKA twigs is developing an AI version of herself to outsource fan interactionsFKA twigs is developing an AI version of herself that she hopes will be able to handle her “online social media interactions”, and is to testify before a Senate committee on the subject of AI regulation.
The singer is set to testify before the Senate Judiciary Subcommittee on Intellectual Property, explaining that she’s been working on a deepfake version of herself to help manage social media interaction with fans.

READ MORE: “We aim to make this an indispensable tool for DJs, independent artists and producers”: New AI stem separation technology secures UK government funding

She says, “In the past year, I have developed my own deepfake version of myself that is not only trained in my personality but also can use my exact tone of voice to speak many languages.”
It will “extend my reach and handle my online social media interactions, whilst I continue to focus on my art from the comfort and solace of my studio,” she adds.
The subcommittee is considering the NO FAKES Act, which will protect artists and actors from unauthorised AI versions of their faces, voices, and likenesses. So, twigs will be discussing her own work in creating a deepfake version of herself, explaining that AI can be helpful for artists.
However, she’ll also be saying that AI can only work when it’s under the control of an artist – like in her own situation.
She’s set to say in her statement, per MusicAlly, “I will be engaging my AI twigs later this year to extend my reach and handle my online social media interactions, whilst I continue to focus on my art from the comfort and solace of my studio.
“These and similar emerging technologies are highly valuable tools both artistically and commercially when under the control of the artist. What is not acceptable is when my art and my identity can simply be taken by a third party and exploited falsely for their own gain without my consent due to the absence of appropriate legislative control.”
Also giving testimony will be the Warner Music Group CEO Robert Kyncl, the boss of twigs’ label.
The post FKA twigs is developing an AI version of herself to outsource fan interactions appeared first on MusicTech.

Swifties drive 1M streams with Sationhead listening party as more Artists take noteLast week, Taylor Nation, the official Taylor Swift fan account, hosted a listening party for her new album "The Tortured Poets Department: The Anthology" on Sationhead, which drove over 1 million streams on Apple Music and Spotify in under 24 hours.....
The post Swifties drive 1M streams with Sationhead listening party as more Artists take note appeared first on Hypebot.

Two notes update Genome The first major update for Genome adds five new Components that offer a mixture of new amp and effects pedal models.

“That was me trying to escape something and being a bit of a dickhead honestly”: Porter Robinson regrets labelling EDM as “not really art”Porter Robinson says he regrets calling EDM “not really art” in a 2014 interview, explaining that he was “being a bit of a dickhead” at the time.

READ MORE: “They have flashy interfaces that make you think they’re doing more than they’re actually doing”: St. Vincent isn’t a fan of plugins in the studio

Robinson became disillusioned with the genre, and in 2014 – in the run-up to the release of his debut album – he appeared in an NME interview dismissing and criticising it. He said at the time, “A lot of the EDM stuff stopped being appealing to me not because of the culture of it but more so because the music is quite functional.
“It exists to make people go crazy, and to me in a lot of ways it’s entertainment and it’s not really art. I know that sounds kind of pompous but, just in terms of expression I think there’s kind of a ceiling to what you can do when you’re trying to operate within this tiny little circle of stuff that can make people go crazy and jump up and down and wanna have an awesome party.”

But, as he tells The Independent in a new interview: “EDM is clearly art … that video was me trying to escape something and being a bit of a dickhead honestly.”
Around the time the NME interview happened, he made the smash hit Clarity with Zedd. But Robinson didn’t want to be associated with it, and even took his name off the credits. He explains, “Around then, I was at my peak level of angst about not wanting to make EDM… and wanting to be cool. I was trying to be a rockstar but really, I was just drinking to get through the shows.”

He describes Avicii’s 2018 suicide as a “wake-up call” for a lot of people in EDM. Robinson is now sober, along with many of his peers. He explains, “Almost every single DJ who was popular in the 2010s is now extremely sober. You start falling apart but then you procrastinate, like putting off the pain. Then it hits you all at once.”
The post “That was me trying to escape something and being a bit of a dickhead honestly”: Porter Robinson regrets labelling EDM as “not really art” appeared first on MusicTech.

Berklee College of Music’s Online Class of 2024: A Testament to TenacityHere are six different 2024 Berklee College Of Music's Online graduates that have had notable and inspirational journeys leading them to commencement day.....
The post Berklee College of Music’s Online Class of 2024: A Testament to Tenacity appeared first on Hypebot.

DHPlugins’ New Bass-Face Multi-Effect Plugin is Free for Limited Time
DHPlugins launched the Bass-Face multi-effect plugin, and it’s free for a limited time, which is down from a list price of £15. However, please note that you’ll need to provide a physical address and your email address when signing up (we know that many BPB readers won’t like this). The developer describes the macOS and [...]
View post: DHPlugins’ New Bass-Face Multi-Effect Plugin is Free for Limited Time

Behringer’s Vintage plugin is now out and available to download for free – for real this timeWe thought we’d be able to get our hands on it earlier this month, but now Behringer really has released Vintage, its first synth plugin, for free.
Earlier this month, some people were able to download it for free, but the Behringer Vintage webpage seemed to be broken, and it turns out there was an “accidental leak”. Behringer explained in a Facebook comment addressing the confusion: “The Vintage VST has not been officially launched and the Weblink for our testers has accidentally leaked. We’re in the process of finalising the plugin and launching it soon.”

READ MORE: Save nearly $2,000 on Brainworx’s Heritage Bundle at Plugin Boutique

And now, it’s finally available for real.
The plugin, which is “based on meticulous modelling of legendary analogue vintage synthesizers,” now has a proper page on the Behringer website. While it’s free, Behringer says that it’s valued at $99, and you can make a donation to the Playing for Change Foundation, which supports music education and works with artists around the world,  if you wish.
It was created with Stefano D’Angelo of music DSP company Orastron, and offers two oscillators with hard sync and a choice of five waveforms, two 12/24 dB filters, a noise generator, as well as two amp modules and dual LFOs.
Meanwhile, Tone2 Audiosoftware clarified that it wasn’t involved in the development of Vintage after some people found similarities between Vintage and Tone2’s Saurus, saying, “The look and feel of the recently released Behringer Vintage has caused confusion among our customers. Behringer Vintage is not a new version of Tone2 Saurus. Both products have a different synthesis architecture and sound different. We are not involved in the development of Behringer Vintage.”
Vintage is available for PC and Mac, and runs in VST/AU/AAX formats.
If you want to get your hands on the plugin, head to Behringer.
The post Behringer’s Vintage plugin is now out and available to download for free – for real this time appeared first on MusicTech.